We offer advanced RF and microwave components including filters, mixers, and synthesizers tailored up to 18GHz. These systems ensure precision in wireless communication, defense electronics, and radar technologies.

• LNAs (Up to 10GHz)
• Filters.
• Complete receiver chain (Up to 10GHz)
• Transmitter chain (Up to 1GHz)
• Power combiners/ Dividers.
• Directional couplers (Up to 10GHz)
• Synthesizers (Up to 5GHz)
• Up convertors (IF to L, C, X, Ku bands)
• Down convertors (Ku, X, C, L to IF bands)
• RF Drivers.
• Mixers (Up to 10GHz)
• System Integration (Up to 18GHz)

Our DC-DC and AC-DC converters range from 30W to 150KW, designed for railways, aerospace, and military platforms. We also provide rugged battery chargers, power factor correction units, and life cycle testers.

Products Range:

• DC-DC Converters
• AC-DC Converters
• N+1 and ORingpower rail modules
• Power Factor Correction (PFC)

Wide Input ranges:

• DC Input: 3.3V to 430VDC
• AC Input: 85V to 265VAC, 1ph, 50Hz
• AC Input: 85V to 180VAC, 3ph, 50Hz

Output:

• Single/ Multi
• Positive/ Negative
• 1.2VDC to 110VDC
• Isolated / Non-Isolated.

Grade wise Applications:

• Industrial grade
• MIL-Grade applications

Indusrty wise Applicaitons:

• Automotive (9-36Vin)
• Military (18-36Vin)
• Telecom (36-72Vin)
• Railways (60-160Vin)
• Naval/ Defence (100-400Vin)

Products Developed:

Range:

• 30W to 150Kw, 1V 500V, 0 to2500A
• DC DC Converters –(Industrial to Aerospace).
• Electronic Load Banks (Manual/Programmable/Computerized)
• Customized Automated Test solutions.
• Thermal Battery Test Systems.
• Life cycle testers for Battery manufacturers.
• Submarine battery Test System.
• Instant Battery Testers.
• Aircraft Battery Maintenance System (Intelligent Charger).
• AC to DC Power Supplies in the range of 0-300V and 0-2500A.
• Battery Chargers (Linear technology as well as SMPS based).
• Float cum Boost Chargers, Cell Boosters, BMS.

Developed Projects:

DC-DC Converters:
Isolated

Fixed output, Single and Multi-output channels:

• Low input voltage (9-75VDC),
• Low output voltages (3.3, 5, 12, 15, 24VDC)
  and Low profile, MIL grade qualified.
• 20W DC-DC Converters (15.4mm height)
• 30W DC-DC Converters (12.7mm height)
• 40W Quad output DC-DC Converter (12.7mm height)
• 60W DC-DC Converter (20mm height)
• 65W Dual output DC-DC Converter
• 100W DC-DC Converters (20mm height)
• 220W Dual output DC-DC Converters (15.5 mm height)
• 300W DC-DC Converters.

Smart DC load banks from 0–2000A support programmable discharging across CV, CC, CP, and CR modes. Integrated with GUI software, they deliver accurate real-time monitoring, testing, and analysis.

Features

• Load current from 0A to 2000A
• Course and fine variations of load current
• Pulse loading (10ms)
• Programmable discharge modes : CV, CC, CP,CR
• Can be used as Discharge Banks for all types of batteries
  vVoltage current, temperature are acquired and recorded for after test analysis
• Precise data acquisition
• Dedicated and menu driven application software package
• Load Voltage from 5V to 200V
• User friendly GUI of the system
• The test results are presented both in graphical and tabular forms
  Forced air cooling

Engineered for pulse firing, squib testing, and current profiling under controlled conditions. These systems feature custom GUIs and logging capabilities for precise thermal battery analysis.

Features:

• Specially designed to test fire the thermal batteries used in missiles
• High precision programmable current pulse for ignition
• Squib firing Electronics for testing squibs / Pyros for all-fire and no-fire currents
• Configurable load current
• Precise data current
• Dedicated application software package
• The test results are presented in both graphical and tabular forms.

High-end maintenance systems for aircraft batteries with rapid charge modes and capacity measurement.
Built-in GUI and RS-232 interfaces enable smart diagnostics, logging, and analysis.

Features:

• State of the art micro controller-based battery analyzer
• SMPS based charger for constant current and constant voltage charging
• Multi step constant current charge
• Constant current electronic load for capacity test
• User configurable end limits for charging/discharging/temperature
• Temperature monitoring and display of the battery pack
• AH computation and display
• Rapid/Burp charge for quick charging
• Dedicated data Acquisition Module for individual cell monitoring
• Custom Built Jig Fixture for monitoring individual cells of the battery pack
• Programming through LCD keypad
• Optical PC interface through RS 232 with user friendly GUI for data logging.

We provide rugged MIL-STD certified electronics like digital voltage regulators and DC-DC converters. Our PRISM-based platforms offer custom embedded display solutions for mission-critical systems.

DIGITAL VOLTAGE REGULATOR

• Designed for Mil and Airborne Applications
• Compact in size by using high frequency switching and use of planner technique
• Single, Dual, and Quad Output DC-DC Converters
• MIL-STD-461E, MIL-STD-1275A & MIL-STD704 and MIL-STD810G compatible.